|
Cleanroom Design and Configuration |
|
|
|
 | | 1. | Furring Wall Systems
Furring walls allow existing walls or channels to be quickly skinned. | 5. | Grille Openings
Return air grilles can be easily installed into our wall panels in the field, or at the factory, reducing field labor costs. | 9. | Ceiling/Head Track Interface
Our gasketed head tracks can interface with standard grids and flush grids providing a virtually seamless transition. | | 2. | Batten Wall Systems
Floor to ceiling walls provide fast installation with a flush surface on both sides of the wall. | 6. | Wall Penetrations
Pass thrus, piping and equipment can penetrate wall panels through simple field modifications. | 10. | Factory Installed Windows
Pre-installed windows with mitered corners provide flush glazing with a beveled back allowing for an easy wipe down. | | 3. | Electric Sliding Doors
Aluminum sliding doors are easily accommodated by interfacing with our wall systems. | 7. | Doors
Aluminum rail and stile doors provide an attractive appearance with a variety of hardware options available. | 11. | Bulkheading
Tool fit-ups and equipment bulkheading can be easily integrated into the Framed Wall System for a sealed interface. | | 4. | Framed Windows
Single or double flush windows can be glazed from stud to stud for full glass viewing. | 8. | Framed Wall Systems
Provide flush wall surfaces on cleanroom side with integrated support on the chase side for piping, conduit and related equipment required to service the cleanroom. | 12. | Elevated Wall Panel
Panels can be elevated for side wall returns. Egg crate and wire mesh can be integrated with the studs to conceal mechanical plenums. |
|
| |
|
|
